/k/ - Weapons

Weapons, Armor, Military Related


[Hide]
Posting Mode: Reply Return
Säge
Name
Subject
Message

Max message length: 5000

Files
E-mail
Password

(used to delete files and postings)

Misc

  • Supported file types: GIF, JPG, PNG, WebM, OGG, and more
  • Max files: 5
  • Max file size: 50.00 MB
  • Read the global rules before you post, as well as the board rules found in the sticky.


11/25/19 Just launched Formerly Chuck's, an imageboard dedicated to television and film! Come check it out and quality post.
11/23/19 Donations can now be made via PayPal, thank you for all of your support!
11/21/19 We have successfully migrated to LynxChan 2.3.0, to see all of the changes to 16chan, click here.
08/15/19 The 16chan Android app is now live! Instructions on how to download it and set it up can be found here.


[Index] [Catalog] [Archive] [Bottom] [Refresh]

(92.65 KB 1466x621 kill-me-now.png)
For those of us in enemy territory - California edition Anonymous 09/19/2019 (Thu) 01:17:49 No. 24
What's the best thing to do for someone stuck in Calif*rnia? I have a life situation that means I'm stuck here for 2-3 more years, after which I plan to move somewhere cold and correct, where I will be justifiably hated.
What should I do in the meantime?

1. No guns till I move - least suspicion, no watchlists etc (if only you knew how bad things really are), but it's possible I miss the window of opportunity before the civil unrest and won't have access to the same hardware the Pedros got.
2. Get whatever california-cucked funs I can actually get - but are they even worth it from a home-defense perspective? The likely threat model is 4 men in body armor doing a 3am home invasion, so I'm not convinced a bolt-action rifle or 9mm peashooter is a good fit for my use case.
3. Just try to yeet it and pick something up- but I don't know shit, obviously, which means I'll probably just get pedro'd or glow'd along the way. Drive to Nevada or something and try a gun show?

It's bad enough here that I can't post this on 4tan, so I've never interacted with /k/ before. I'm sure I've already committed several CA thoughtcrimes in this post alone. Let our failure be a lesson to your states. It won't even hurt my feelings if you shoot me on sight as a Californian when I move to your state. God has forsaken us, and it is entirely our fault.

Pic related, it's the front page of today's paper.
>>24
I'd go for #2. If nothing else it at least gets you a chance to practice, and in a home defence situation, I'd take a nugget over a butter knife.
Bolt action rifles are nothing to sneer at, you at least have a fighting chance with one, and body armour is going to do fuck all against glorious 7.62x54r or 30-06.
>>27
I'm not gonna comply, neither should you

So driving magazines over from other states is by far the easiest way of getting a hold of them
say you and a friend were willing to do something like that...
>disassemble magazines
>one person takes the body
>other takes the internals
in the event either of you have your car searched (don't let them search), you won't be able to be charged with intent to construct or possession of an assault weapon
>>24
Drive to Nevada or Oregon and buy an AR/AK before they are federally outlawed (they will be). Heed my advice before it is too late.
>>24
just build an 80% weapon ya numbskull. You can order a polymer AR-15 lower receiver, and then finish it with basic tools like a drill and stuff. Then you go online or a gun shop or something and you order yourself an AR-15 upper receiver and the rest of the parts, which are not currently restricted.

just because the state wants to disarm you doesn't mean you should comply. if you go with an 80% lower you don't get put on a list or anything because you never bought a firearm. if you're smart/lucky maybe you can pay for everything and have it shipped without even having it traced back to you.

or you can even 3d print a nylon lower. but don't take my advice, I'm in CA and nogunz as well. so what the hell do I know.

I am working on 3d printing a glock frame. I have a cheap printer but I've already printed a half scale glock frame and it seems alright so far. I printed it in PLA. it won't stand up to heat if you leave it in a car but it will shoot. you can then buy parts on ebay. once you have the frame you need a slide and upper/lower parts kits plus the barrel. you do need to use a file or dremel or something to file down some aluminum which would be a bit of work.

if that works out I may print a new frame in nylon or zytel which will hold up much better.

maybe I won't follow through with my plan and just get scared out of it. but it's certainly a plan. the thing is, if I order the parts online, even with a card not linked to me, the address still will. you need to show ID to open up a PO box, too.

as I was typing this post I realized I might, or might not, be able to go to a firearms dealer and have parts ordered to them, and pay with cash, so I'm not even part of the whole trail. not sure if a dealer would be willing to do that but I think it might be legal. the only part that's regulated is the lower receiver from what I understand.

look up some things on your own. I don't really know that much.
>>113
seriously considering this.
can you give me some idea of what the process is? I.E. do I just slap down ~$800 and walk out with an undocumented AR-15 right away or is there a waiting period/forms I need to fill out? I was under the impression there was a background check required, how long does that take?
I.E. is this a quick one-day out and back trip or do I need to plan on a hotel room for three days etc.
How do I make sure I don't end up on either a National or California list of gun owners? I'd rather not be on anybody's list when the Cohen act confiscations start. any advice you or other anons can give is greatly appreciated.
Yeah it's way too hot here and filled with Jews and Spics. It really is just Israel 2.0, more concentrated here than anywhere else in the JewSA.
You can still get wheels and levers over in CA along with low cap autoloaders.
>>113
>Drive to Nevada or Oregon
Are you soft in the head? They are going ask for his drivers license. Proof of residency.
>>24
Buy some aluminium and a desktop CNC machine, then go to town.
How would one get an unmarked gun in a Canadian Minecraft server? Was thinking of asking some Hells Angels members in OSRS. Am willing to do drugs in LoL and/or kill someone in Roblox as well to prove I'm not a cop.
>>147
any recommendations on a desktop milling machine? overall costs? guides?
What all would it take to build a luty?
>>148
cringe
>>151
Check out castboolits.gunloads forum. Specifically the gunsmithing subforum. The info on there is far better than any other place.
>>27 This. Something like 30-06 will pierce high quality plate armor, versus something shitty like 9mm which will be stopped by it. It'll also go through walls, car doors, and other stuff if they try to hide. You aren't going to be able to do that with a 9mm. And let's be realistic, you aren't going to be able to take your time and aim and shoot the same target twice. You get one shot on a human sized moving target. Use a high powered rifle caliber and make it count.
>>193 9mm can probably go through doors (and drywall) unless they are reinforced but overall I agree with you.

Delete
Report


no cookies?